IBA Dosimetry Clinical Presentations Header

Best Practices and Experience with Dosimetry & QA Solutions Watch the teasers (open access). Register to discover all.

Clinical Presentations Hub

Easily access the clinical presentations hub to watch the content you like at any time.

How to ensure highest quality Beam Commissioning (ESTRO Virtual Symposium)

Part 1: Monte Carlo beam data validation for error-free TPS beam modelling and QA (presented by M. Kowatsch).

Part 2: Error-free beam data scanning and commissioning with SMARTSCAN (presented by M. Adolph).

M. Kowatsch & M. AdolphM. Kowatsch (Senior Medical Physicist, LKH Feldkirch, Austria)
M. Adolph (Product Manager, IBA Dosimetry )

4 min. (open access preview)42 min. (full presentation, logged-in members)

Clinical Experience with SciMoCa Monte-Carlo Plan QA

Presentation of the implementation and clinical experience of SciMoCa at Heidelberg. From installation to workflow efficiency and the analysis of SciMoCa accuracy for Linac, TomoTherapy and CyberKnife cases.

Dr. Kai Schubert, Medical PhysicistDept. of Radio-Oncology and RT
University Clinical Heidelberg, Germany

5 min. (open access preview)21 min. (full presentation, logged-in members)

Monte Carlo QA Clinical Experience: SciMoCa Patient QA for CyberKnife® ¹

Lean about the clinical implementation of Monte Carlo dose check and plan QA for stereotactic patient QA. Understand how SciMoCa¹ enables patient QA accuracy and time saving through workflow automation and fast Monte Carlo calculations.

Ph.D. Christoph FuerwegerHead of Medical Physics, European Cyberknife Center

1 min. (open access preview)28 min. (full presentation, logged-in members)

Monte Carlo QA Accuracy –Physics Experience with SciMoCa Patient QA

In this webinar the physics of Monte Carlo dose check and plan QA will be discussed.

Prof. Dr. rer. nat. Markus AlberSection for Medical Physics, Department of Radiation Oncology,
Heidelberg University Hospital

1 min. (open access preview)29 min. (full presentation, logged-in members)

Monte-Carlo-Based QA of measured Base Data for Beam Modelling with SciMoCa

Learn how SciMoCa Monte Carlo is used to independently validate commissioning beam data and to tune the TPS beam model for high accuracy dose planning.

M. Kowatsch, Senior Medical PhysicsLKH Feldkirch, Austria

4 min. (open access preview)16 min. (full presentation, logged-in members)

¹⁾ All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any relationship, sponsorship, or endorsement between IBA or its products and the owners of these trademarks.