Quality control in Medical Imaging

Quality control in Medical Imaging - Rev.8

TABLE OF CONTENTS Quality Control for Diagnostic Imaging Modalities Why IBA Dosimetry? 04 Dental Radiography Complete QA Solutions for all modalities Multifunctional Complete Solution Complete Solution Kit for Rad / Flu / Mammo / CT Radiography / Fluoroscopy Complete Solutions Multimeter Dosimeters kV-Meter Detectors Test Devices Mammography Complete Solutions Multimeters Dosimeters kV-Meter Detectors Test Devices Computed Tomography Complete Solutions Multimeter Dosimeter Ionization Chamber / Detectors Software Test Devices 08 08 10 11 12 16 17 19 19 21 26 27 29 30 31 32 33 38 39 41 42 43 43 44 Multimeter Dosimeters kV-Meter Detectors Test Devices Accessories Medical Display Complete Solutions Spot-Luminance-Meter Software Film Processing Sensitometers Densitometers Combination Devices Accessories Software Accessories for Radiology Frames and Stands Adapters Filters Carrying Cases Resolution Tests – Line-Group Tests Radiation Safety Survey Radiation Meter Dose Area Product Meters KermaX plus TinO KermaX plus Accessories Product Overview Tables Measuring Devices Overview Measuring Devices Matrix 46 47 48 49 49 50 51 52 53 54 55 56 57 57 58 58 58 59 60 60 61 61 62 64 65 67 68 69 71 72 73 74

4 WHY IBA DOSIMETRY? Outstanding QA Solutions IBA Dosimetry is your full QA solution partner, allowing you to provide quality control in medical imaging: Better image quality for improved diagnosis and therapy Advanced imaging dose control for patient safety BEAM QA IMAGE QA DISPLAY QA PATIENT DOSE QA Outstanding Customer Care and Service IBA Dosimetry is your partner long after the product sale. With your CAREprogram, IBA provides you with a wide range of expert services that enable you to maximize efficiency and usability of your medical imaging quality control. Expert Service by a dedicated team of qualified professionals determined to support more than 10.000 users around the world when needed: Telephone and on-site support Repair service PRODUCT OVERVIEW RADIODIAGNOSTICS

6 WHY IBA DOSIMETRY? Preferred Partner of the Medical Imaging Industry IBA dosimetry QA solutions are used by leading x-ray equipment manufacturers. IBA Inside: Dose Area Product Meters from IBA are built into highest standard x-ray machines powering patient dose safety MagicMaX multimeter is used by x-ray service organizations and final testing Medical Imaging Quality Assurance tools in Radiation Therapy IBA offers complete solution kits for the imaging QA needs in RT Dose and Image QA for CT Sim and Linac IGRT systems kV Imaging QA and Dosimetry for CBCT, OBI, and CT-Sim We are using the Multimeter MagicMaX from IBA Dosimetry GmbH for acceptance and constancy Tests with our EXAMION ® x-ray systems as well as other systems that we maintain. We value the usability and high quality of the measurement device as well as the fast and competent service of IBA Dosimetry, especially regarding calibration and maintenance of our devices. During various trainings we could benefit from the extensive know-how of IBA which enabled us to offer our customers the legally required routine checks of the IBA Dose-Area- Product-Meters. The trainings at the IBA International Competence Center (ICC) have further deepened our knowledge in the area of x-ray quality assurance and made our workflow more efficient. Lars Olav Bromm Project Manager EXAMION GmbH, Munich, Germany The most notable feature of the MagicMaX solution is its speed and simplicity of use. The system quickly and automatically records imaging doses and resets following each exposure for serial measurements. From setup to breakdown, my TrueBeam’s kV imaging system is evaluated in 5 minutes. It’s hard to argue against routine imaging QA when such an easy and affordable solution is available. Jacob A. Gersh, PhD Medical Physicist Gibbs Cancer Center, Spartanburg, SC, USA PRODUCT OVERVIEW RADIODIAGNOSTICS

8 Complete Solution Multifunctional (2) (1) (5) (6) (3) (4) The new flexible solution in beam QA. Multidetector „XR“ VD0202030 (3) Modular equipment: (7) Versatile through exchange of detectors and ionization chamber. Due to the modular design for all x-ray modalities: Radiography Fluoroscopy Mammography Computed Tomography Dental Radiography Luminance measurement Basic equipment VD0202010: (1) For Radiography, Fluoroscopy & Dental Radiography. (Parameters: Dose / dose rate, Dose per pulse, kVp / PPV, Time, Total filtration, Half Value Layer (HVL), Waveform) Multidetektor „XM“ VD0202040 (4) For Mammography. (Parameters: Dose / dose rate, Dose per pulse, kVp / PPV, Time, Total filtration, Half value layer (HVL), Waveform) Current Probe (mAs-Messsonde) VD0201975 (5) For invasive and non-invasive measurements of the tube current. USB powered system to be used with PC/Laptop. Illumance detector MM-LS VD0201951 (6) Light output measurements of image intentsifiers Software (2) and viewing boxes. Clear & structured design gives you a fast total overview as well as comprehensive expert level Ionisations chamber DCT10-MM VD1020110 (7) detail view. The various options of Excel®-exporting For DLP (in mGy*cm) and dose measurements and will grand fast and easy reporting. for CTDI calculations at CT Scanners. PRODUCT OVERVIEW RADIODIAGNOSTICS

9 Test devices: Primus A VD0203650 For image quality in Radiography & Fluoroscopy according to DIN 6868-150,2013, DIN 6868-4,2007 and new DIN 6868-4, 2017. (For detail information page 21.) MAM-162 VD0203741 For image quality in Mammography according to DIN 6868-162. (For detail information page 34.) 2-pieces PMMA CT-Phantom VD1003110 For CTDI-measurements according to IEC60601-2-44, IEC 61223-3-5, IEC 61223-2-6. (For detail information page 44.) DigiDent For acceptance- and constancy tests in Dental Radiography according to IEC 61223-3-4 / 61223-2-7 and DIN 6868-5 / 6868-151. (For detail information page 50.) Complete Sets MagicMaX Universal Full QA Kit MagicMaX Universal CT Case Test phantoms for all X-ray modalities 3-part CT phantom for adults Multidetector radiography / fluoro- and pediatric scopy XR and mammography XM Ionization chamber Ionization chamber DCT10-MM for CT DCT10-MM for CT MagicMaX Current Probe Illuminance detector MM-LS Illuminance detector MM-LS MagicMaX Universal rad/flu Case Case MagicMaX Universal Multidetector Multidetector radiography / fluoroscopy XR radiography / fluoroscopy XR and mammography XM Ionization chamber DCT10-MM for CT MagicMaX Current Probe Illuminance detector MM-LS MagicMaX Current Probe Test phantom for radiography / fluoroscopy Illuminance detector MM-LS MagicMaX Universal mammo Case Multidetector mammography XM Test phantom MAM-162 MagicMaX Current Probe Illuminance detector MM-LS PRODUCT OVERVIEW RADIODIAGNOSTICS

10 Complete Solution Kit for Rad / Flu / Mammo / CT Dose & Image QA for Rad / Flu / Mammo / CT Full QA Kit VD0250125 Your All-In-One Solution keeping you mobile. Consisting of: high-end Multimeter Solution for all needs in beam verification; Incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time Test phantoms for Radiography, Fluoroscopy and Mammography Primus A phantom for Digital & conventional Radiography and Fluoroscopy; Test device Mammo-14 for constancy tests / Quality Checks of Mammographic equipment according DIN 6868-162; incl. Primus PMMA attenuator DCT10-MM 2-part PMMA CT-Phantom CT Ionization Chamber 10 cm Adult Head & Body / Pediatric Body DCT30-MM Test device Mammo-14 Image Quality Phantom for digital MagicMaX Current Probe mammography systems, according DIN 6868-14. Unique invasive and non-invasive measurements of the tube current Multidetector XR for Radiography / Dental and Fluoroscopy and Multidetector XM Illuminance Detector MM-LS for Mammography for attachment to the Light output measurements of image MagicMaX Universal; intensifiers and viewing boxes Measuring values: kVp, PPV, HVL, dose, dose rate, dose per pulse, exposure time Transportation Cases and wave form 2 case solution with trolley For more technical information, please see the MagicMaX family matrix at the end of the brochure! PRODUCT OVERVIEW RADIODIAGNOSTICS

12 Complete Solutions Your All-In-On Dose & Image QA Solution. Rad / Flu Case VD0250122 Consisting of: high-end Multimeter Solution for all needs in beam verification; incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time Test Phantom for Radiography & Fluoroscopy Primus A phantom for Digital & conventional Radiography & Fluoroscopy; incl. PMMA attenuator Multidetector XR for Radiography & Fluoroscopy Measuring values: kVp, PPV, HVL, dose, dose rate, dose per pulse, exposure time and wave form MagicMaX Current Probe: Unique invasive & non-invasive measurements of the tube current Illuminance Detector MM-LS: Light output measurements of image intensifiers and viewing boxes Rad / Flu Carring Case Multimeter Solution Rad / Flu Kit VD0250122_US Your All-In-On Dose QA Solution. Consisting of: high-end Multimeter Solution for all needs in beam verification; incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time Multidetector XR for Radiography & Fluoroscopy Measuring values: kVp, PPV, HVL, dose, dose rate, dose per pulse, exposure time and wave form MagicMaX Current Probe: Unique invasive & non-invasive measurements of the tube current Illuminance Detector MMLS: Light output measurements of image intensifiers and viewing boxes Carrying Case RADIOGRAPHY / FLUOROSCOPY For more technical information, please see the MagicMaX family matrix at the end of the brochure!

13 Complete Solutions Measuring Set IBArad/flu-L, incl. LXcan VD0250198 Complete measuring set for radiologists and hospitals with digital/conventional fluoroscopic/radiographic X-ray units. Consisting of: Test Device Primus A Dimensions in mm: 300 x 300 x 18.5 Dosimeter DOSIMAX plus I Single-channel dose meter for use in combination with Solid state detectors RQA / RQM or patient equivalent DEDX, for dose, dose rate and time measurement according IEC 61674. Solid State Detector RQA For use with MagicMaX and Dosimax plus series for dose measurements. Detailed Check Instruction Fluoroscopy and Form according to DIN 6868-4, 2007 on CD Stand For test device Primus A and solid state detector DEDX QC Kit IBAcan Carrying Case Optional: DSA Test Device VD0203300 (including manual and carrying case) Mounting Frame, Primus VD0213104 For test devices DIGI-13 and Primus, Optional Accessories: Illuminance Detector LX-LS VD0602960 For measuring illuminance (lux) / ambient light of image display devices and at viewing boxes. Tripod VD0610200 For measuring device LXcan, adjustable height 60 cm – 153 cm. High Precision Mini Tripod VD0610210 For measuring device LXcan. (This tripod version fits into the carrying case highly recommended for use with a chest unit. of QC Kit IBAcan.) One Attenuation Body is necessary for Primus L: Aluminum Pre-Attenuator, 25 mm with supporting plate VD0503200 or: PMMA-Attenuation Body VD0203521 For test device Primus L. Dimensions in mm: 300 x 300 x 31. Consisting of: 30 mm PMMA and 1 mm Cu. RADIOGRAPHY / FLUOROSCOPY QC Kit IBArad/flu-L excl. LXcan VD0250199 Same measuring devices as order number VD0250198 "Measuring Set IBArad/flu-L", without QC Kit IBAcan. For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52.

14 Complete Solutions QC Kit IBArad-digital incl. LXcan VD0250202 Complete measuring kit for quality checks in digital radiology (CR/DR) acc. to DIN 6868-13 and at image display devices according to IEC 61223-2-5, DIN 6868-157, AAPM TG18. Consisting of: Test Device DIGI-13 Al-Pre-Attenuator, 25 mm With supporting plate Dosimeter DOSIMAX plus I Single-channel dose meter for use in combination with Solid state detectors RQA / RQM or patient equivalent DEDX, for dose, dose rate and time measurement according IEC 61674. Solid State Detector RQA For use with MagicMaX and Dosimax plus series for dose measurements. Detailed Check Instruction and Form R-F13 on CD Spot-Luminance-Meter LXcan Incl. mask for screen contact measurements Power Supply with 4 Adapters adapters for UK / US / AU / EU USB-Cable* For automatic transfer of the measured data and for recharging batteries Carrying Case Optional Accessories: Illuminance Detector LX-LS VD0602960 For measuring illuminance (lux) / ambient light of image display devices and at viewing boxes. Tripod VD0610200 For measuring device LXcan, adjustable height 60 cm – 153 cm. High Precision Mini Tripod VD0610210 For measuring device LXcan. (This tripod version fits into the carrying case of QC Kit *Alternatively to USB-Cable, but exclusively IBArad-digital.) for Automatic Transfer of the Measured Data: Interface Cable (2 m) RS 232 VD0601460 For automatic transfer of the measured data. Mounting Frame, Primus VD0213104 For test devices DIGI-13 and Primus, highly recommended for use with a chest unit. QC Kit IBArad-digital excl. LXcan VD0250203 Same measuring devices as order number VD0250202 "QC Kit IBArad ", without Spot-Luminance-Meter LXcan, USB-cable and power supply. For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52. RADIOGRAPHY / FLUOROSCOPY

15 Complete Solutions QC Kit IBArad/flu-analog VD0250305 Complete measuring kit for QA tests at conventional radiographic and fluoroscopic X-ray units according to IEC 61223-2-1/-9/-11 and DIN 6868-2 and -3. Consisting of: Test Device ETR1 Including centering tube Dimensions in mm: 280 x 280 x 18.5 Dosimeter DOSIMAX plus I Single-channel dose meter for use in combination with Solid state detectors RQA / RQM or patient equivalent DEDX, for dose, dose rate and time measurement according IEC 61674. Solid State Detector RQA For use with MagicMaX and Dosimax plus series for dose measurements. Detailed Check instruction on CD Stand for Test Device ETR1 Stand for Al-filter or DEDX; hight 38.5 cm Sensitometer / Densitometer DUOLIGHT Power Supply (for 110 V / 220 V DC) Absolutely necessary for Sensitometer / Densitometer DUOLIGHT. Thermometer RT-1 (digital) Carrying Case RK-1 RADIOGRAPHY / FLUOROSCOPY Recommended as Attenuation Body (not included in the Set): Aluminum Pre-Attenuator, 25 mm VD0503200 With supporting plate. Optional: Mounting Frame RW-1 VD0213100 For test device DIGI-13. Beam Alignment Test Tool – BATT VD0403850 For measuring collimator beam alignment of the central beam. Suitable for use in combination with test devices ETR1, DIGI-13 and Primus.

16 Multimeter Multimeter VD0201940 -rad/flu/dent The flexible solution for thorough measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including fixed solid state Multidetector "XR" Ability to attach an additional solid state detector for dose measurements Including robust aluminum carrying case Multimeter is designed according to IEC 61674 and IEC 61676 Measurement Parameters: Dose / dose rate Dose per pulse kVp / PPV Time Total filtration Half value layer (HVL) Waveform Options / Additional Accessories for MagicMax "Logo" series: Notebook / Convertable VD0201930 Instead of your own laptop. MagicMaX Current Probe VD0201975 For use with MagicMaX for invasive and non-invasive measurements of the tube current. Illuminance Detector MM-LS VD0201951 For use with MagicMaX. Solid State Detector RQA VD0202850 For use with MagicMaX / Dosimax plus for dose measurements only (look page 20) Solid State Detector RQM VD0202860 For use with MagicMaX / Dosimax plus for dose measurements only (look page 32) RADIOGRAPHY / FLUOROSCOPY

17 Dosimeters Dosimeter According to IEC 61674; the flexible solution for thorough -rad/flu/dent VD0201945 dose measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state Dose-Detector RQA Ability to attach an additional solid state detector for simultaneous measurements of exit and entrance dose Including aluminum carrying case Measurement Parameters: Dose / dose rate Dose per pulse Time Dosimeter The flexible solution for smart -DEDX VD0201946 dose measurements at X-ray units.Combines entrance dose measurement with a patient equivalent attenuator of 25mm Al. Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including integrated solidstate detector & 25 mm Al patient equivalent Detector DEDX Ability to attach an additional solid state detector for simultaneous measurements of exit and entrance dose Including aluminum carrying case Measurement Parameters with Detector DEDX: Dose: 20 μGy - 9999 mGy Dose rate: 20 μGy/s - 400 mGy/s Time: 1 ms - 19999 s Options / Additional Accessories: Notebook / Convertable VD0201930 Instead of your own laptop. Solid State Detector RQA VD0202850 For use with MagicMaX for dose measurements only. Solid State Detector RQM VD0202860 For use with MagicMaX for dose measurement only. (look page 32 Mammography) RADIOGRAPHY / FLUOROSCOPY For more technical information, please see the MagicMaX family matrix at the end of the brochure!

18 Dosimeters Dosimeter Dosimax plus A (basic unit) VD0201747, Detector RQA VD0202850 PTB-approved single-channel dosimeter according to IEC 61674, designed for acceptance tests and for quality checks at radiographic, fluoroscopic, dental and mammographic X-ray units. In Rad/Flu for use with solid state detector RQA. Measurement Parameters with Detector RQA: Dose: 200 nGy - 9999 mGy Dose rate: 80 nGy/s - 70 mGy/s (50 - 150 kV) Time: 1 ms - 19999 s Options / Additional Accessories: Carrying Case VD0225720 For dosimeter DOSIMAX plus series; offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX). Dosimeter DOSIMAX plus I, (basic unit) VD0201748 Single-channel dose meter for use in combination with Solid state detectors RQA / RQM or patient equivalent DEDX, for dose, dose rate and time measurement according IEC 61674. Measurement Parameters with Detector RQA: Dose: 200 nGy - 9999 mGy Dose rate: 80 nGy/s - 70 mGy/s (50 - 150 kV) Time: 1 ms - 19999 s Measurement Parameters with Detector DEDX: Dose: 20 μGy - 9999 mGy Dose rate: 20 μGy/s - 400 mGy/s Time: 1 ms - 19999 s Option / Additional Accessory: Carrying Case VD0225720 For dosimeter DOSIMAX plus series; offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX). The dosimeters DOSIMAX plus Aand DOSIMAX plus I are medical devices (according to the directive 93/42/EWG) of class I m / 12. RADIOGRAPHY / FLUOROSCOPY

19 kV-Meter kV-Meter VD0201948 The flexible solution for thorough measurements -rad/flu/dent at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state kV-detector Including aluminum carrying case Measurement Parameters: PPV / kVp Time Total filtration Half value layer (HVL) Option / Additional Accessory: Notebook / Convertable VD0201930 Instead of your own laptop. Detectors Multi Detector XR VD0202030 Multidetektor is to be used with the MagicMaX Universal in kV a range of 40 - 150kV.The small footprint detector has 2 marked active areas, one for dose, dose rate, dose/ puls and time and the other one for kVp, PPV, Half Value Layer, total filtration. Size: 20 x 52 x 10 RADIOGRAPHY / FLUOROSCOPY For more information, please see the MagicMaX family matrix at the end of the brochure!

Detector RQA Detector DEDX 20 Detectors Solid State Detector RQA VD0202850 For quality checks and acceptance tests at radiographic, fluoroscopic and dental X-ray units, 50 - 150 kV. Solid State Detector DEDX VD0202100 Integrated in the patient equivalent attenuator, consisting of 25 mm Al, incl. one additional 1 mm Cu-filter for quality checks at radiographic and fluoroscopic X-ray units, 50 - 150 kV. Size: 169 x 176 mm Length of detector cables: 2 m. - Current Probe VD0201975 For invasive and non-invasive measurements of the tube current in combination with the MagicMaX and MagicMaX Universal Multimeters. Features: Unique combination of invasive and non-invasive Comprehensive analysis with MagicMaX- Meter software Convenient selection of measurement range Benefits: All in one device Cost efficient solution Workflow convenience Illuminance Detector MM-LS VD0201951 For illuminance measurement in combination with MagicMaX. Measurement can triggered at the detector for multiple measuremnets at viewing boxes. The Detector can also be used for continuous measurements for image intensifier light-output measurements. RADIOGRAPHY / FLUOROSCOPY

21 Test Devices Test Device Primus A (standard model) VD0203650 For quality checks at digital & conventional radiographic and fluoroscopic X-ray units according to DIN 6868-150 and DIN 6868-4. Test Parameters: Spatial resolution Contrast resolution Alignment of light and X-ray field Geometry symmetry Image scale dimensions in mm: 300 x 300 x 18.5 An Attenuation Body is necessary, if no Solid State Detector DEDX is available: Aluminum Pre-Attenuator VD0503200 25 mm with supporting plate or PMMA-Attenuation Body VD0203521 Consisting of 30 mm PMMA and 1 mm Copper. Option / Additional Accessory: Stand for Test Device Primus / Digi 13 VD0212170 Mounting Frame for Primus VD0213104 For more information see chapter " Accessories for Radiology". Test Device DVT3D VD0203660 For quality checks in 3D digital volume tomography according to DIN 6868-150 and DIN 6868-4. Specifications: Quality check in 3D image quality with contrast/ spatial resolution, iso center coincidence, noise and uniformity. Laser marks for easy positioning of the test device in the Isocenter Contrast/ Spatial resolution (1.3 - 1.0 - 0.8 - 0.7 - 0.6 - 0.5 mm) Dimension: 120x120x60 mm Option / Additional Accessory: Stand for DVT Test Device VD0203664 RADIOGRAPHY / FLUOROSCOPY

22 Test Devices Test Device DIGI-13 VD0203560 For quality checks at all types of CR/DR radiographic systems. Test Parameters: Homogeneity Spatial and contrast resolution Alignment of light and X-ray field Image scale Artifacts Geometry symmetry An Attenuation Body is necessary, if no Solid State Detector DEDX is available: Option / Additional Accessory: Aluminum Pre-Attenuator VD0503200 Stand for Test Device Primus / Digi 13 VD0212170 25 mm with supporting plate (absolutely necessary For more information see chapter in case of using the test device DIGI-13). "Accessories for Radiology". Test Device ETR1 incl. Centering Tube VD0203100 For quality checks in conventional (analog / film-based) radiography according to DIN 6868-3. Test Parameters: Spatial resolution Alignment of light and X-ray field Geometry symmetry Contrast resolution Measuring areas for optional density Option / Additional Accessory: Stand for Test Device ETR1 VD0212160 For more information see chapter "Accessories for Radiology". DSA Test Device incl. Carrying Case VD0203300 For quality tests in digital subtraction angiography (IEC 61223-3-3, DIN 6868-150 and DIN 6868-4). Test Parameters: Dynamic range DSA contrast sensitivity Artifacts Logarythmic check RADIOGRAPHY / FLUOROSCOPY

23 Test Devices Contrast-Detail-Phantom CD DISC 2.0 VD0203720 (including carrying case) For quality control in radiology, considering the perception by the observer. Especially designed for evaluating fluoroscopic X-ray units. Test Parameters: Contrast resolution Spacial resolution Optimization, evaluation and comparison of different fluoroscopic systems Determination of the optimum exposure technique Evaluation of the image quality versus dose relation Contrast-Detail-Phantom CDRAD VD0203750 (including analyzer-software and carrying case) For quality control in radiography. Monitoring of Image Information Content: Contrast-Detail curve/detectability Tests low contrast and spatial resolution Test Parameters: Contrast and spatial resolution Optimization, evaluation and comparison of different radiologic systems Determination of the optimum exposure technique and background density Comparison of image quality at various thicknesses of PMMA Evaluation of the image quality versus dose relation Four different versions available. With aid of the accurate and easy to use analyser software quality reports can be generated. Test Device FFA 4090 R VD0203291 For checking the film-screen contact at radiographic cassettes according to ISO 4090. Internal dimensions without frame in cm: 42 x 49 x 0.7. External dimensions including the frame in cm: 44 x 51 x 0.9. BATT – Beam Alignment Test Tool VD0403850 Verifies that the angular alignment of the central beam is perpendicular to the image receptor. (Recommended in combination with test devices DIGI-13, ETR1 and Primus.) RADIOGRAPHY / FLUOROSCOPY

24 Test Devices Test Device Set LiRa (Collimator / Beam Alignment Test Tool) VD0403865 Verification of the proper alignment of the collimator light field with the X-ray field Verification of the central beam alignment (perpendicular to the image receptor) Consisting of: Test device Primus A (Please see page 10 for more information) Beam Alignment Test Tool (Please see above) Test Set AEC-Systems for Radiography VD0203800 Set of PMMA-slabs for checking the Automatic Exposure Control. For X-ray units working in the range of 40 - 150 kV according to IEC 61223-3-1. Set consisting of: 3 PMMA slabs, dimensions in mm: 240 x 240 x 50 2 PMMA slabs, dimensions in mm: 240 x 240 x 20 1 PMMA slab, dimensions in mm: 240 x 240 x 10 1 Al slab, dimensions in mm: 240 x 240 x 25 HVL Aluminum Filter Set for Radiography VD0403320 Aluminum attenuator set for HVL measurements at radiographic X-ray units working in the range of 40 - 150 kV. Dimensions: 100 mm x 100 mm each. Purity of Al: 99.5 %. Set consisting of: 5 filter plates of 0.1 mm Al 2 filter plates of 0.5 mm Al 5 filter plates of 1.0 mm Al 2 filter plates of 2.0 mm Al RADIOGRAPHY / FLUOROSCOPY

25 Test Devices Tungsten Edge Test Device TX 5 VD0203580 For determination of modular transfer function (MTF). According to IEC 62220-1. Consisting of: 1 mm thick tungsten plate, edge ± 5μm, fixed on a 3 mm thick lead plate Software IQ Analyzer Primus VD0203530 Software which performs quality checks on images taken with Primus in three simple steps: Select - Analyze - Results. The IQ Analyzer Primus can perform automatic, fast, quantitative and reproducible constancy measurement on multiple imaging modalities. Specifications: Automated analyze of DICOM images from various modalities, including CR, DR, DX, XA and RF systems. Technical Specifications / System requirements: Efficient selction of DICOM images through Processor : Intel® Core 2 Duo easy menue Memory : 1 Go DDRAM Automated analyze of Image Quality by determining: Minimum screen resolution : 1024*768 Positioning, SNR, dynamic, distortion and resolution Windows based system (XP, Vista, 7, 8) (MTF) Generate reports and archive in both PDF and Microsoft® Excel® formats RADIOGRAPHY / FLUOROSCOPY

27 Complete Solutions Your All-In-One Dose & Image QA Solution. Mammo Case VD0250123 Consisting of: high-end Multimeter Solution for all needs in beam verification; Incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time Multidetector XM for Mammography Measuring values: kVp, PPV, HVL, dose, dose rate, dose per pulse, exposure time and wave form* Test device MAM 162 Test phantom for image QA at digital Mammorapy systems Illuminance Detector MM-LS Light output measurements of image intensifiers and viewing boxes Carring Case Mam Multimeter Solution Mammo Kit VD0250123_US Your All-In-One Dose QA Solution. Consisting of: high-end Multimeter Solution for all needs in beam verification; Incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time Multidetector XM for Mammography Measuring values: kVp, PPV, HVL, dose, dose rate, dose per pulse, exposure time and wave form* Illuminance Detector Light output measurements of image intensifiers and viewing boxes Carrying Case *For the following Target-Filter-Combinations: Mo/Mo, Mo/Rh, Rh/Rh, W/Rh, W/Ag. MAMMOGRAPHY For more technical information, please see the MagicMaX family matrix at the end of the brochure!

28 Complete Solutions QC Kit IBAmam-analog VD0250373 Complete measuring kit for quality checks at conventional mammographic installations according to DIN 6868-7 / DIN 6868-152 / EPQC (EUREF). Consisting of: Test Device Mammo-152 Dimensions in mm: 180 x 240 Dosimeter DOSIMAX plus I (basic unit) Detector RQM For mammographic installations Magnifying Glass For 8-fold magnification Foam Material Cuboid For checking the compression pressure ➤ Carrying Case Additional Accessory: Test Device FFA 4090 M VD0203281 For checking the film-screen contact in Option: mammography – ISO 4090. MagicMax Universal with XM Detector (instead of Dosimax plus) Measuring Set IBAmam-digital according to PAS 1054 VD0250155 Complete measuring set for constancy tests at digital mammographic installations according to PAS 1054. Consisting of: Test Device PASMAM 1054 C Incl. carrying case Dosimeter DOSIMAX plus I (basic unit) Detector RQM For mammographic installations Carrying Case for Dosimeter DOSIMAX plus Series Offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX) Optional: For luminance / illuminance measurements of your Contrast-Detail-Phantom CDMAM VD0203701 image display device, please see chapter "Quality Control With software, incl. carrying case at Medical Displays", page 52. MAMMOGRAPHY

29 Multimeter Multimeter VD0201970 -mam The flexible solution for thorough measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including fixed Multimeter detector XM Possibility to connect additional solid state detectors for dose measurements Including aluminum carrying case Multimeter is designed according to IEC 61674 and IEC 61676 Measurement Parameters*: Dose / Dose rate Dose per pulse kVp / PPV Time Total filtration Half value layer (HVL) Waveform Options / Additional Accessories: Notebook / Convertable VD0201930 Instead of your own laptop. Current Probe VD0201975 For use with MagicMaX for invasive and non-invasive measurements of the tube current. Illuminance Detector (lx) VD0201951 For use with MagicMaX. Solid State Detector RQM VD0202860 For use with MagicMaX. Solid State Detector RQA VD0202850 For use with MagicMaX. Also available as: -Universal with XM Detector *For the following Target-Filter-Combinations: Mo/Mo, Mo/Rh, Rh/Rh, W/Rh, W/Ag. MAMMOGRAPHY For more technical information, please see the MagicMaX family matrix at the end of the brochure!

30 Dosimeters Dosimeter According to IEC 61674; the flexible solution for thorough -mam VD0201955 measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state Dose-Detector RQM Ability to attach an additional solid state detector for simultaneous measurements of exit and entrance dose Including aluminum carrying case Measurement Parameters: Dose / Dose rate Dose per pulse Time Options / Additional Accessories: Notebook / Convertable VD0201930 Instead of your own laptop. Solid State Detector RQA VD0202850 For use with MagicMaX. Dosimeter Dosimax plus A (basic unit) VD0201747, Detector RQM VD0202860 PTB-approved single channel dosimeter according to IEC 61674, designed for acceptance tests and for quality checks at radiographic, fluoroscopic, dental and mammographic X-ray units. In Mammo for use with solid state detector RQM. Measurement Parameters with Detector RQM: Dose: 500 nGy - 9999 mGy Dose rate: 1.5 μGy/s - 300 mGy/s Time: 1 ms - 19999 s Options / Additional Accessories: Carrying Case VD0225720 For dosimeter DOSIMAX plus series; offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX). MAMMOGRAPHY For more technical information, please see the MagicMaX family matrix at the end of the brochure!

31 Dosimeters Dosimeter DOSIMAX plus I, (basic unit) VD0201748, Detector RQM VD0202860 Single-channel dosimeter for QA tests at radiographic, fluoroscopic and mammographic X-ray units. In Mammo for use with the appropriate solid state detector (RQM). Measurement Parameters with Detector RQM: Dose: 500 nGy - 9999 mGy Dose rate: 1.5 μGy/s - 300 mGy/s Time: 1 ms - 19999 s Options / Additional Accessories: Carrying Case VD0225720 For dosimeter DOSIMAX plus series; offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX). kV-Meter kV-Meter The flexible solution for thorough measurements -mam VD0201958 at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state kV-detector Including aluminum carrying case Measurement Parameters: PPV / kVp Time Total filtration Half value layer (HVL) Waveform Option / Additional Accessorie: Notebook / Convertable VD0201930 Instead of your own laptop. MAMMOGRAPHY The dosimeters DOSIMAX plus A and DOSIMAX plus I are medical devices (according to the directive 93/42/EWG) of class I m / 12. For more technical information, please see the MagicMaX family matrix at the end of the brochure!

32 Detectors Multi Detector XM VD0202040 Multidetektor is to be used with the MagicMaX Universal in kV a range of 21 - 49 kV and for following Target-Filter Combinations: Mo/Mo, Mo/Rh, Rh/Rh, W/Rh, W/Ag. The small footprint detector has 2 marked active areas, one for dose, dose rate, dose/puls and time and the other one for kVp, PPV, Half Value Layer, total filtration. Size: 20 x 52 x 10 Solid State Detector RQM VD0202860 For quality checks and acceptance tests in mammography, 25 - 35 kV. Length of detector cable: 2 m. - Current Probe VD0201975 For invasive and non-invasive measurements of the tube current in combination with the MagicMaX and MagicMaX Universal Multimeters. Features: Unique combination of invasive and non-invasive Comprehensive analysis with MagicMaX-Meter software Convenient selection of measurement range Benefits: All in one device Cost efficient solution Workflow convenience Illuminance Detector MM-LS VD0201951 For illuminance measurement in combination with MagicMaX. Measurement can triggered at the detector for multiple measuremnets at viewing boxes. The Detector can also be used for continuous measurements for image intensifier light-output measurements. MAMMOGRAPHY

33 Test Devices Test Device Mammo-152 VD02034343 (including carrying case) For acceptance and constancy tests (DIN V 6868-152, DIN EN 61223-3-2 and DIN 6868-7 / EPQC (EUREF) in conventional mammography. Test Parameters: Object thickness and tube voltage compensation resp. AEC reproducibility Attenuation factor Spacial resolution Contrast and image resolution Artifacts Geometry Check of missed tissue at chest wall Contrast-Detail-Phantom CDMAM 4.0 VD0203701 Optimized for European Guidelines for Quality Assurance in Digital Mammography 4th edition. Gold discs are placed in the area of interest of the psychometric curve Improved specifications based on highly accurate production processes Developed as a result of both customer feedback and customer requirements Consisting of: 0,5 mm Polished Aluminum (99,5%) base plate with 672 pure gold disc with 21 different diameters (0.08 ... 2.0 mm; +0.005 (Mean + 2SD)) and 16 different thickness (0.012 μm ... 2.8 μm; +3% (Mean + 2SD)), covered by a PMMA plate 240 * 162 * 3 mm 4 x 10 mm (± 0,1 mm) polished PMMA plates CDMAM 4.0 Analyser software based on EUREFs CDCOM for CDMAM 4.0. Carrying case Option / Additional Accessory: PMMA Spacer Set VD0203782 10 pieces of spacers 180 x 15 mm, with the following thicknesses 10, 8, 5 und 2 mm. MAMMOGRAPHY Also available as CDMAM 3.4 on request.

34 Test Devices Test device MAM-162 VD0203741 For acceptance tests of digital mammography systems, according DIN 6868-162. Consisting of: 40 mm base plate with integrated Al step wedge (14 steps from 0 - 5.2 mm) and 2 rows of steel balls for checking the image limitations towards the thorax side 6 mm structural plate for test inserts and 2 rows of steel balls with recess of 80 mm x 80 mm PMMA test insert with square marking Test insert SDNR (Signal Difference-to-Noise Ratio) Test insert HK (High contrast) 3 x 20 mm PMMA attenuator semi-circle 3x 20 mm, 1 x 10 mm, 1 x 4 mm 1 x 20 mm (+/-0,3mm) PMMA Attenuation Body (320 x 260 x 20 mm) Carrying case Test device MAM-14 VD0203623 For constancy check of digital mammography systems, according DIN 6868-14. Consisting of: 40 mm base plate with integrated Al step wedge 6 mm structural plate with recess for test insert and Al-Step wedge and 2x 5 steel balls for checking the image limitations towards the thorax side 6 mm PMMA with recess for test inserts PMMA attenuator semicircle 2 x 20 mm (+/-0.3mm); 2 x 10mm (+/- 0.3mm) 2 x 20 mm (+/-0,3mm) PMMA attenuation plate (260 x 320 mm) Test insert PMMA Test insert SDNR (Signal Difference-to-Noise Ratio) Carrying case MAMMOGRAPHY For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52. For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52.

35 Test Devices Test device PASMAM 1054 C VD0203715 For constancy tests / quality checks of mammographic equipment according PAS 1054. Consisting of: 40 mm base plate with integrated Al step wedge with 14 steps from 0 to 5.2 mm and 2 rows of steel balls for checking the image limitations towards the thorax side 6 mm structural plate with recess for test inserts, 2 rows of steel balls with integrated turnable resolution test in line groups of 5, 6, 7, 8 and 10 lp/mm PMMA-test insert with square marking Test insert for constancy tests – ACR Test insert high contrast resolution Test insert contrast to noise ratio Attenuation body 2 x 20 mm Attenuation body 2 x 10 mm Carrying case DIGIMAM Phantom VD0203760 (including carrying case) For assessment of digital mammography. The phantom complies with the European Guidelines for Quality Assurance in digital Mammography Screening. Test Parameters: Contrast detail analysis Geometry Quick check of bad columns CNR measurement SNR measurement (reference point) Check of missed tissue at chest wall Check of dynamic range in three types of tissue MAMMOGRAPHY For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52.

36 Test Devices EU Test Set VD0203785 Complete phantom test set for digital mammography. For type testing and testing according to EUREF protocol. Consisting of: Homogeneous Phantom PMMA plates, 8 pcs. (180 x 240 x 75) Stainless steel plate MTF tool of stainless steel and Al plate X-ray ruler set, 4 pcs. PMMA spacer set, 10 pcs. Geometric Distortion Phantom Al Foil Set Lead plate set, 4 pcs. PMMA plate set, 10 pcs. (40 x 20 x 20) Carrying case Test device FFA 4090 M VD0203281 For checking the film-screen contact at mammographic cassettes according to ISO 4090. Consisting of a fine metal wire grid, which is inserted in 2 plates of acryl. For checking cassettes of a size up to 24 cm x 30 cm. Specifications: Dimensions in cm: 31.5 x 25.5 x 0.7 (internal dimensions without frame) Dimensions in cm: 33.5 x 27.5 x 0.9 (external dimensions with frame) Mammographic Step Wedge VD0203602 Specifications: 21 steps (Al) Dimensions in mm: 10 x 6.3 x 105 Test Parameters: Sensitometric curve shape Geometry Speed Mid-gradient MAMMOGRAPHY

37 Test Devices Breast Compression Test Device for Mammography VD0203480 For measurement of constancy and accuracy of the compression of mammography units, as described in the "European Guidelines for quality assurance..." for the annual test. Specifications: Measuring range: 200 g - 25 kg Resolution of LCD: 10 g Test set AEC-Systems for Mammography VD0203810 Set of PMMA-slabs for checking the Automatic Exposure Control. Consisting of: 3 PMMA slabs, dimensions in mm: 180 x 240 x 20 1 PMMA slab, dimensions in mm: 180 x 240 x 10 HVL Aluminum Filter Set for Mammography VD0403310 For determination of half value layer in mammography. Specifications: Dimensions in mm: 100 x 100 each Purity of Al: 99.9 % Consisting of: 7 filter plates of 0.1 mm Al MAMMOGRAPHY

39 Complete Solution CT Case VD0250124 Your complete solution for CTDI measurements.* Consisting of: Multimeter with integrated high voltage module for Ionization Chambers DCT10-MM CT Ionization Chamber 10 cm 3-Part PMMA CT Phantom for dose measurements (set for adults & pediatric) Illuminance Detector For use with MagicMaX Universal ; Measurement range 1 – 10,000 lx Trolley Case for convenient transportation Optional devices: DCT30-MM VD1020302 CT Ionization Chamber 30cm for wide beam CT's Multidetector XR for CT in tomo mode (non-rotational) VD0202030 for PPV/kV measurements in CT COMPUTED TOMOGRAPHY *MagicMax Universal Cases are preconfigured to meet all standard QC needs. Optional tools for additional applications are available.

40 Complete Solutions QC Kit IBAct pediatric VD1050103 Adult Head & Body / Pediatric Head & Body Complete measuring kit for CTDI measurements at all types of CT scanners. Consisting of: 3-part Modular PMMA CT-Phantom for Dose Measurements Adult head & body / pediatric head & body Dosimeter Dosimax plus A HV With internal high voltage supply for use with ionization chamber DCT10-RS Ionisation Chamber DCT10-RS / Lemo Extension Cable, 8 m Specialist Booklet "Radiation Exposure in Computed Tomography" Carrying Case With removable trolley QC Kit IBAct Standard VD1050102 Adult Head & Body Complete measuring kit for dose measurements in computed tomography according to IEC 60601-2-44, IEC 61223-2-6, -3-5. Consisting of: 2-parted Modular CT-Phantom for Dose Measurements Adult head & body Dosimeter Dosimax plus A HV With internal high voltage supply for use with ionization chamber DCT10-RS Ionisation Chamber DCT10-RS / Lemo Extension Cable, 8 m Specialist Booklet "Radiation Exposure in Computed Tomography" Carrying Case With removable trolley COMPUTED TOMOGRAPHY For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52.

41 Multimeter VD0250126_US Multimeter CT Kit Your All-In-One Dose QA Solution.* Consisting of: High-end Multimeter Solution for all needs in beam verification; incl. advanced MagicMaX software for fast and complete dose measurement overview; Plug and Play system allows fast and seamless workflow within ONE minute setup time DCT10-MM CT Ionization Chamber 10 cm Multidetector XR for CT in tomo mode (non-rotational), Radiography & Fluoroscopy Measuring values: kVp, PPV,HVL, dose, dose rate, dose per pulse, exposure time and wave form Illuminance Detector Light output measurements of image intensifiers and viewing boxes Carrying Case Optional devices: DCT30-MM VD1020302 CT Ionization Chamber 30cm for wide beam CT's Multidetector XR for CT in tomo mode (non-rotational) for PPV/kV measurements in CT COMPUTED TOMOGRAPHY *MagicMax Universal Cases are preconfigured to meet all standard QC needs. Optional tools for additional applications are available.

43 Ionisation Chambers Ionization Chamber DCT10 VD1020100 For DLP (in mGy*cm) and CTDI measurements at CT scanners, according to IEC 61223-2-6, -3-5, 100 - 150 kV. For use with MagicMaX Universal → DCT10-MM: VD1020110 Dosimax plus A HV → DCT10-RS: VD1020100. Specifications: Active length: 100 mm Length of chamber cable: 2 m Ionization Chamber DCT30-MM VD1020302 Ionization chamber to be used with MagicMaX Universal for DLP [mGycm] and dose [mGy] measurements for calculating CTDI at wide beam CT's. Specification: Active length: 300 mm Length of chamber cable: 2 m Multi Detector XR VD0202030 Multidetektor is to be used with the MagicMaX Universal in kV a range of 40 - 150kV.The small footprint detector has 2 marked active areas, one for dose, dose rate, dose/ puls and time and the other one for kVp, PPV, Half Value Layer, total filtration. Size: 20 x 52 x 10 Software Software CT QALite VD0010140 Fast, automated CT analysis for routine QA or extensive performance evaluation User friendly Windows interface Comprehensive image parameter trend analysis COMPUTED TOMOGRAPHY

44 Test devices 3-part PMMA CT-Phantom Adult Head & Body / Pediatric Head & Body VD1003105 Innovative 3-part nested PMMA phantom for CTDI measurements. Designed to image pediatric and adult head and body in accordance with FDA performance standard for diagnostic X-ray systems (21CFR 1020.33). Consisting of: 1 pediatric head phantom, 10 cm diameter, 5 holes 1 adult head-/pediatric body phantom, 16 cm diameter, 4 holes 1 adult body annulus, 32 cm diameter, 4 holes (The above-mentioned 3 phantoms fit into each other!) 13 acrylic rods for plugging all the phantom holes 2-part PMMA CT-Phantom Adult Head & Body VD1003110 Phantom for CTDI measurements according to IEC 60601-2-44, IEC 61223-3-5, IEC 61223-2-6. Consisting of: 1 adult head phantom, 16 cm diameter, 5 holes 1 adult body annulus, 32 cm diameter, 4 holes 9 acrylic rods for plugging all the phantom holes COMPUTED TOMOGRAPHY

45 Test devices Catphan 500 Phantom VD0403450 (including carrying case) For evaluating the maximum obtainable performance potential of axial and spiral CT scanners. Test Parameters: Slice width Sensitometry (Teflon, Acrylic, LDPE, Air) Pixel size Low contrast with supraslice and subslice contrast targets Image uniformity module Catphan 600 Phantom VD0403460 (including carrying case) For evaluating the maximum obtainable performance potential of multi-slice CT scanners with enhanced sensitometry samples for radiation therapy planning. Test Parameters (additional to Catphan 500): Sensitometry: Delrin Acrylic, Polystyrene, H2O, PMP Slice geometry and point source bead module Catphan 700 Phantom VD0403470 The Catphan® 700 Phantom has been designed to address the image performance mea surement requirements for state of the art CT volume scanners Test Parameters: The phantom retains many of the tests and features offered in the other Catphan® mod els. Following test objects have been refined in this development. Higher resolution test patterns 1 to 30 LP/cm Smaller acrylic spheres in the sensitometry slice geometry module and additional bone and lung samples (for radiation therapy treatment planning). Innovative wave insert for measuring slice geometry and resolution across the scan area New rotation mount to be able to rotate the mounted phantom 360° with alignment detents at 45° intervals COMPUTED TOMOGRAPHY

47 Multimeter Multimeter VD0201940 -rad/flu/dent The flexible solution for thorough measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including fixed solid state Multi-Detector "XR" Ability to attach an additional solid state detector for dose measurements Including robust aluminum carrying case Multimeter is designed according to IEC 61674 and IEC 61676 Measurement Parameters: Dose / dose rate Dose per pulse kVp / PPV Time Total filtration Half value layer (HVL) Waveform Options / Additional Accessories for MagicMax "Logo" series: Notebook / Convertable VD0201930 Instead of your own laptop. MagicMaX Current Probe VD0201975 For use with MagicMaX for invasive and non-invasive measurements of the tube current. Illuminance Detector MM-LS VD0201951 For use with MagicMaX. Solid State Detector RQA VD0202850 For use with MagicMaX for dose measurements only (look page 49) Solid State Detector RQM VD0202860 For use with MagicMaX for dose measurements only (look page 32) DENTAL RADIOGRAPHY Also available as: -Universal with XR Detector

48 Dosimeters Dosimeter VD0201945 -rad/flu/dent According to IEC 61674; the flexible solution for thorough measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state Dose-Detector RQA Ability to attach an additional solid state detector for simultaneous measurements of exit and entrance dose Including aluminum carrying case Measurement Parameters: Dose / Dose rate Dose per pulse Time Options / Additional Accessories: Notebook / Convertable VD0201930 Instead of your own laptop. Dosimeter Dosimax plus A (basic unit) VD0201747, Detector RQA VD0202850 PTB-approved single channel dosimeter according to IEC 61674, designed for acceptance tests and for quality checks at radiographic, fluoroscopic, dental and mammographic X-ray units. For dental applications to be used with solid state detector RQA. Measurement Parameters with Detector RQA: Dose: 200 nGy - 9999 mGy Dose rate: 80 nGy/s - 70 mGy/s (50 - 150 kV) Time: 1 ms - 19999 s Option / Additional Accessory: Carrying Case VD0225720 For dosimeter DOSIMAX plus series; offers space for 1 DOSIMAX plus and 2 solid state detectors (not DEDX/DE2DX). DENTAL RADIOGRAPHY For more technical information, please see the MagicMaX family matrix at the end of the brochure! The dosimeter DOSIMAX plus A is a medical device (according to the directive 93/42/EWG) of class I m / 12.

49 kV-Meter kV-Meter rad/flu/dent VD0201948 The flexible solution for thorough measurements at X-ray units – a new generation of measuring devices! Features: USB based system to be used with PC/Laptop MagicMaX-Meter measurement software Including solid state kV-detector Including aluminum carrying case Measurement Parameters: kV Time Total filtration Half value layer (HVL) Wave form Options / Aadditional Accessories: Notebook / Convertable VD0201930 Instead of your own laptop. Detectors Multi Detector XR VD0202030 Multidetektor is to be used with the MagicMaX Universal in kV a range of 40 - 150kV.The small footprint detector has 2 marked active areas, one for dose, dose rate, dose/ puls and time and the other one for kVp, PPV, Half Value Layer, total filtration. Size: 20 x 52 x 10 Solid State Detector RQA VD0202850 For quality checks and acceptance tests at radiographic, fluoroscopic and dental X-ray units, 50 - 150 kV. Length of detector cable: 2 m For more technical information, please see the MagicMaX family matrix at the end of the brochure! For luminance / illuminance measurements of your image display device, please see chapter "Quality Control at Medical Displays", page 52. DENTAL RADIOGRAPHY

50 Test Devices According to IEC 61223-3-4 / IEC 61223-2-7 & DIN 6868-5 / DIN 6868-151. Test Device DigiDent for Digital Dental Radiology (Acceptance- and Constancy Tests) Suitable for intra-oral and panoramic x-ray system. Specifications: Upper slab with centering rings for different cone sizes and absorber of 6 mm Al Resolution test (different types in different models as well as additional resolution tests are available - see below) 0.5 mm Al plate with contrast determination bore holes Basic plate with gaps for dose detector and sensor of the X-ray The following Versions of DigiDent are available: Test Device DigiDent U VD0903150 2.0 / 2.5 / 2.8 / 3.1 / 5.0 / 5.8 / 6.3 Lp/mm, diagonal arrangement Test Device DigiDent I VD0903153 4.0 / 4.5 / 5.0 / 6.0 / 7.0 / 8.0 Lp/mm, diagonal (IEC) arrangement Test Device DigiDent P VD0903154 1.6 / 1.9 / 2.2 / 2.5 / 3.0 Lp/mm, diagonal (IEC) arrangement Test Device DigiDent G VD0903151 2.5 and 5.0 Lp/mm horizontal and vertical arrangement The following Additional Resolution Tests are available for the DigiDent: Additional Resolution Test - U VD0903158 2.0 / 2.5 / 2.8 / 3.1 / 5.0 / 5.8 / 6.3 Lp/mm, diagonal arrangement Additional Resolution Test - I VD0903156 4.0 / 4.5 / 5.0 / 6.0 / 7.0 / 8.0 Lp/mm, diagonal (IEC) arrangement Additional Resolution Test - P VD0903152 1.6 / 1.9 / 2.2 / 2.5 / 3.0 Lp/mm, diagonal (IEC) arrangement Additional Resolution Test - G VD0903157 2.5 and 5.0 Lp/mm, horizontal and vertical arrangement Test Device Unident F VD0903170 Phantom for dental radiology using films. Phantom housing with centering rings for different cone sizes, a foil of 0.3 mm Cu and two PTFE steps (8 and 16 mm). DENTAL RADIOGRAPHY

51 Test Devices Contrast-Detail-Phantom CDDENT VD0203719 (including analyzer-software and carrying case) For quality control for dental X-ray systems. This Contrast-Detail-Phantom is an aid for improving image quality. Monitoring of Image Information Content: Contrast-Detail curve/detectability Tests low contrast and spatial resolution Specifications: 3 mm Al-tablet with 100 cylindrical holes: Depth: 0.04 .. 0.7 mm, ± 0.02 mm (10 exponential steps) Diameter: 0.1 .. 1.0 mm, ± 0.02 mm (10 exponential steps) Quality report generation, aided by the accurate and easy to use analyzer software. Accessories Secondary Attenuator VD0903220 Additional Filter, 1 mm Cu VD09032202 For use with Secondary attenuator at panoramic dental X-ray units. Holder for Supporting Plate, Type GENDEX VD0903210 Holder for Supporting Plate, Type SIRONA VD0903230 DENTAL RADIOGRAPHY

53 Complete Solutions QC Kit IBAcan VD0601405 Complete measuring kit for luminance measurements at image display devices (grayscale) according to DIN 6868-157 (acceptance tests) and IEC 61223-2-5 (constancy tests), AAPM TG18. Consisting of: Spot-Luminance-Meter LXcan Incl. mask for screen contact measurements Power Supply *Alternatively to USB-Cable, but exclusively for Automatic Transfer of the Measured Data: Interface Cable (2 m) RS 232 VD0601460 For automatic transfer of the With 4 adapters (RoHs conform) measured data. USB-Cable* For automatic transfer of the measured data and for recharging batteries Carrying Case Optional Accessories: Illuminance Detector LX-LS VD0602960 For measuring illuminance (lux) / ambient light of image display devices and at viewing boxes. Tripod VD0610200 For measuring device LXcan, adjustable height 60 cm – 153 cm. High Precision Mini Tripod VD0610210 For measuring device LXcan. (This tripod version fits into the carrying case of QC Kit IBAcan.) MEDICAL DISPLAYS

54 Spot-Luminance-Meter Quality Assurance solutions for imaging devices, like medical displays and viewing boxes, are needed to ensure best image quality for improved diagnosis in all x-ray modalities, like Radiology, Fluroscopy, Mammography, CT and Dental Radiology. Unique combination of distance and screen-contact measurements in one device: Spot-Luminance-Meter LXcan VD0601400 For QC-tests at image display devices (grayscale) incl. photometric detector with achromatic optic, integrated scattered light tube and mask for screen contact measurements. Measurement Parameters: Display: 1.2'' TFT (65K color) Alignment sensor: user definable Distance sensor: ultrasonic Targeting: display finder F.O.V.: 1.6° Measuring range: 0.05 - 10,000 cd/m2 f1' uncertainty: ≤ 3% Interface: USB; RS232 Stray-light-baffle: integrated Weight: 450 g Recommended Accessory for LXcan for additional Illuminance Measurements: Illuminance Detector LX-LS VD0602960 For measurements of illuminance in lux in the range of 0.1-10,000 lx. The ambiant light of image display devices At viewing boxes MEDICAL DISPLAYS

57 Sensitometers Sensitometer Unilight S VD0204110 # 001 Suitable for constancy tests. For exposing an X-ray film with a standard 21-step wedge. Sensitometer Unilight AS VD0204104 # 001 Suitable for acceptance tests. For exposing an X-ray film with a high precision 21-step wedge, calibrated (DIN V 6868-55). Densitometers Densitometer Unilight D VD0204108 # 001 Suitable for constancy tests. For a stepwise measurement of optical densities from a 21-step standard sensitometer wedge and for measurements of the optical density of X-rays (film size up to 35 x 35 cm). Densitometer Unilight AD VD0204100 # 001 Suitable for acceptance and constancy tests. Functionality as densitometer Unilight D, but including calculation of the processing parameters light sensitivity (LE) and light contrast (LK). Densitometer Unilight ADA VD0204102 # 001 Suitable for acceptance and constancy tests. Densitometer Unilight D i VD0204111 # 001 Suitable for constancy tests. Functionality as densitometer Unilight D, but Functionality as Densitometer Unilight D, but alternatively suitable for auto-reading of optical including RS 232 interface. densities (motorized measuring section) and auto-calculating of light sensitivity (LE) and light A Power Supply is necessary for all Types contrast (LK). Incl. RS 232 interface. Densitometer Unilight D / TR VD0204109 # 001 Suitable for constancy tests. Functionality as densitometer Unilight D, but especially also suitable for dry laser films. of Densitometers: Power Supply VD0214260 For 110 V / 220 V DC. Optional Accessory: Interface Cable VD0204112 For Densitometer Unilight D i. Sensitometers and Densitometers are developped according to IEC 61223-2-1, German Standards DIN 6868-2 (Constancy Tests) resp. DIN V 6868-55 (Acceptance Tests). FILM PROCESSING

58 Combination Devices Sensitometer and Densitometer in one Unit: Sensitometer / Densitometer Duolight VD0204300 # 001 Suitable for constancy tests. Sensitometer Unilight S and densitometer Unilight D in one unit. Sensitometer / Densitometer Duolight A VD0204302 # 001 Suitable for constancy tests. Sensitometer Unilight S and densitometer Unilight D in one unit with motorized measuring section for auto-reading of densities and an RS 232-interface. Sensitometer / Densitometer Duolight AS VD0204304 # 001 Suitable for acceptance tests. Sensitometer Unilight AS and densitometer Unilight AD Sensitometer / Densitometer Duolight AS A VD0204306 # 001 Suitable for acceptance tests. Sensitometer Unilight AS and Densitometer Unilight ADA in one unit. Calibrated according to DIN V 6868-55. in one unit. Calibrated according to A Power Supply is necessary for all Types DIN V 6868-55. of Combination Devices: Power Supply VD0214260 For 110 V / 220 V DC. Accessories Thermometer RT-1 (Digital) VD0219250 Software Software for monitoring the X-ray Film Development Process: Software Infosens Light VD0002405 For two processing units. Software Infosens Light VD0002404 For one processing unit. Software Infosens Light VD0002406 For three processing units. FILM PROCESSING

60 Frames and Stands Stand for Test Device Primus / DIGI-13 VD0212170 As well as for solid state detector DEDX and Aluminium Pre-Attenuator. Specifications: Dimensions of the stand plate in mm: 300 x 300 Height of the stand in mm: 435 Stand for Test Device ETR1 VD0212160 As well as for solid state detector DEDX and Aluminium Pre-Attenuator. Specifications: Dimensions of the stand plate in mm: 280 x 280 Height of the stand in mm 385 Mounting Frame, Type RW-1 VD0213100 For test devices ETR1 and DIGI-13, highly recommended for use with a chest unit. Mounting Frame, Primus VD0213104 To mount test device Primus or Digi-13 at the chest wall stand. Adapters Adapter for Small Collimators VD0212190 Distance of collimator rails: 98 mm - 174 mm. Adapter for Mobilett E/B VD0212220 To be used with Siemens systems. Adapter for Mobilett Plus VD0212210 To be used with Siemens systems. Adapter for Mobilett Mira Handle VD0212241 to be used with Siemens systems. Adapter for Practix 2000 VD0212200 To be used with Siemens systems. Adapter for Blue Handle Mobilett XP VD0212240 To be used with Siemens systems. More adapters are available on request. ACCESSORIES FOR RADIOLOGY

61 Filters Additional Filter, 1 mm Cu VD0212110 For the patient equivalent attenuator 11.5 cm x 11.5 cm. More Al & Cu Filters in different sizes and thicknesses are available on request. Carrying Cases Carrying Case “Dosimax plus” VD02259720 For 1 Dosimax plus and 2 solid state detectors (RQA/RQM) or 1 ionization chamber. Carrying Case “QC Kit IBAflu-L” VD0225115 For equipment as listed on page 15. Carrying Case “Universal”: Without insert, suitable for the transport of smaller, special cases in one piece of luggage. Carrying Case “Universal with Trolley” VD0230880 Internal dimensions in mm: 600 x 600 x 235. Further cases on request. ACCESSORIES FOR RADIOLOGY

62 Resolution Tests – Line-Group Tests X-ray Test Pattern Tests for Determination of the Visual Resolution Line-Group Tests Type 81 Order No. Type Range of Resolution in lp / mm Dimensions in mm VD0219122 VD0219132 VD0219133 VD0219134 VD0219135 VD0219136 VD0219137 VD0219138 VD0219139 VD0219141 VD0219125 VD0219142 VD0219128 VD0219129 VD0219124 VD0219143 VD0219100 VD0219146 VD0219147 VD0219130 VD0219131 VD0219103 VD0219101 1 - 83 4 a 4 b 4 c 6 - 1.0 6 - 2.0 6 - 3.0 6 - 4.0 6 - 1.8 6 - 2.8 16 18 18 b 18 c 18 d 21 38 41 42 43 68 80 81 0.5...5.0 0.5...8.0 0.8...5.5 1.4...8.0 1.0...2.0 2.0...3.0 3.0...4.0 4.0...5.0 1.8...3.15 2.8...5.0 0.5...4.0 0.5...5.0 0.5...10.0 0.5...16.6 0.5...20.0 2.0...10 0.6...5.0 0.6...3.4 2.0...6.0 3.4...10.0 1.4...8.4 2.0...6.0 0.6...10.0 110 x 42 45 x 45 45 x 45 45 x 45 Ø 32 Ø 32 Ø 32 Ø 32 Ø 32 Ø 32 120 x 40 55 x 45 47.5 x 57.5 47.5 x 57.5 47.5 x 57.5 94 x 50 50 x 50 50 x 50 50 x 50 50 x 50 74 x 35 60 x 38 65 x 55 Besom Tests Order No. Type Range of Resolution in lp / mm Dimensions in mm VD0219123 VD0219127 VD0219149 23 39 82 0.5...5.0 1.5...20.0 1.0...10.0 150 x 50 60 x 30 80 x 40 ACCESSORIES FOR RADIOLOGY

63 Resolution Tests – Line-Group Tests Tests for Determination of the Focal Spot Size Sector-Star Tests Order No. Type Angle of Single Line within a Sector Number and Sizes of Patterned Sectors Diameter in mm VD0219104 VD0219105 VD0219106 VD0219107 9 / 0.5 9 / 1.0 9 / 1.5 9 / 2.0 0.5° 1.0° 1.5° 2.0° 4 - 45° 4 - 45° 4 - 45° 4 - 45° 55 55 55 55 Tests for Determination of the Focal Spot Size Star Tests Order No. Type Angle of Single Line within a Sector Number and Sizes of Patterned Sectors Diameter in mm VD0219108 VD0219109 9 / 1.5 / 360 1.5° 9 / 2.0 / 360 2.0° 1 - 360° 1 - 360° 55 55 Type 9 / 1.5 Type 9 / 1.5 / 360 ACCESSORIES FOR RADIOLOGY

65 Survey Meter Survey Meter SM 3 D VD0401170 Portable survey meter for the measurement of the ambient dose rate equivalent dH*(10)/dt Areas of Application: Portable survey meter for Measurement of Ambient dose equivalent rate in Medicine, Industry, Nuclear Power Plant, and Life-Sciences, research and development facilities, Technical Specifications: M-Measuring value Ambient dose rate equivalent dH*(10)/dt Measuring range 0.01 μSv/h ... 999 μSv/h Dose rate averaging every 60 seconds Intrinsic Error < 25 % (referring to Co-60) Energy range Photon radiation 40 keV ... 1.3 MeV Radiation detector Type energy compensated halogen-quenched Geiger-Mueller-Tube Overload capacity 10 - times Display Digital on LCD Audible Background lightning Power Supply Batteries 2 x LR 6 Type AA 1.5 V Battery lifetime approx. 100 hrs (at background radiation level) Operating conditions Temperature - 20 °C ... + 50 °C Rel. Humidity max. 90 % (at 30 °C) Weight ≤ 250 g Dimensions 145 x 80 x 40 mm RADIATION SAFETY

66 Survey Meter Survey Meter OD-02 VD0401118 For measurements of ambient and directional equivalent dose of pulsed radiation fields and dose rate of X-rays, gamma and beta radiation. Measurement Parameters: Detector type: Air-opened ionization chamber Dose rate display: 0 ... 2000 μSv/h, 0 ... 2000 mSv/h Photon energy range: 6 keV - 15 MeV (<15 MeV with optional PMMA-Moderator Lid) Beta energy range: 60 keV - 2 MeV Optional Accessories: Connecting Cable VD0401111 50 m for survey meter OD-01 / 02. PMMA-Moderator Lid VD0401112 For measurements < 15 MeV. Software VD0401119 For survey meter OD-02. Personal Dosimeter Electronic Personal Dosemeter ED 150 VD0401510 with alarm function and dose rate indication for the detection of the personal -dose when handling ionising radiation. PTB-approved dosemeter for measuring gamma and X-rays for the measuring size Hp(10) (personal dose equivalent) Detector: energy compensated GM tube Radiation in front of the user's body (detection of a solid angle of 180 °) 4 preset dose and dose rate alarm thresholds Measuring Areas: Dose indication range: 0.1 μSv ≤ Hp(10) ≤ 10 Sv Dose rate indication range: 0.1 μSv/h – 1.5 Sv/h Dose rate measuring range: 1 μSv/h - 1.5 Sv/h RADIATION SAFETY

68 Dose Area Product Meters (DAP-meters) The Convenient Solution for the Determination of Diagnostic Reference Levels and Individual Patient Dose Values and QA Measurements Compliance with the following Standards: – IEC 60580 "Medical Electrical Equipment - Dose area product meters" – IEC 60601-1 "Medical Electrical Equipment - General requirements for basic safety and essential performance". Medical device, class IIb, according to "Council Directive 93/42/EEC of 14 June 1993 concerning Medical devices". The light transparency of more than 75 % and the extended kV range starting from 40 kV underline the outstanding features of the system. Easy installation due to cost effective and flexible cabling system based on tele communication standard cable (no high voltage cable is used). KermaX® plus TinO (Two in One) DAP-meter and real-time dosimeter (time resolution: 500 μs) dedicated to measure simultaneously DAP/DAP rate as well as Cumulative air kerma (real time dosimeter) Air kerma rate Exposure time (KermaX® plus TinO DDP) Suitable for measurements in pediatric applications due to its digital resolution of 0.01 μGym2 KermaX® plus TinO IDP 120-TinO-IDP Rectangular, transparent ionization chamber with integrated electronics, a 10-digit internal background lighting LC- Display, interface optionally. KermaX® plus TinO DDP 120-TinO-DDP Rectangular, transparent ionization chamber with integrated electronics and a "Dual Line Display" with two very bright LED display lines indicating either DAP / DAP-rate and exposure time or dose/dose rate; printer interface. DOSE AREA PRODUCT METERS

69 DAP-meters KermaX® plus IDP 120-IDP Ideal solution for a quick and convenient retrofit installation dedicated to measure DAP and DAP rate for patient dose monitoring. Rectangular, transparent ionization chamber with integrated electronics and a 10-digit internal background lighting LCD display; optional RS 232 / RS 485 for computer or printer interface Suitable for measurements in pediatric applications due to its digital resolution of 0.01 μGym2 KermaX® plus SDP 120-SDP Easy to install standard dosimeter dedicated to measure DAP and DAP rate for patient dose monitoring. Rectangular, transparent ionization chamber with integrated electronics and a separate 10-digit background lighting LCD Single Line Display providing an RS 232 PC / Printer interface Suitable for measurements in pediatric applications due to its digital resolution of 0.01 μGym2 DOSE AREA PRODUCT METERS

70 DAP-meters KermaX® plus DDP "Single" 120-DDP S Duo-channel multifunctional dosimeter dedicated to measure DAP or DAP rate or exposure time in patient dose monitoring. One rectangular, transparent ionization chamber with integrated electronics and "Dual Line Display D" with two very bright LED display lines indicating either the DAP / DAP rate or exposure time The system provides two RS 232 interfaces (RIS/HIS and printer connection) The chambers can be delivered in the highly sensitive version on request. KermaX® plus DDP "Duo" 120-DDP D Duo-channel multifunctional dosimeter dedica- ted to measure DAP or DAP rate or exposure time in patient dose monitoring. Two rectangular, transparent ionization chambers with integrated electronics and "Dual Line Display D" with two very bright LED display lines indicating either the DAP / DAP rate or exposure time The system provides two RS 232 interfaces (RIS/HIS and printer connection) The chambers can be delivered in the highly sensitive version on request. DOSE AREA PRODUCT METERS

71 DAP-meters KermaX® plus C 120-C Easy to install standard dosimeter dedicated to measure DAP and DAP rate for patient dose monitoring. Circular, nontransparent or transparent ionization chamber with separated electrometer box and a separate 10-digit background lighting LCD Single Line Display providing an RS 232 PC / Printer interface Standard resolution: 0.1 μGym 2 Four standard sizes are available; customized solutions on request. Accessories Printer Set “Star” 120-Star Consisting of: Robust matrix-printer, type Star Printer cable Power supply 1 set of labels (1,000 pcs.) Printer Set “Zebra S” 120-Zebra_S Consisting of: Robust thermo-printer, type Zebra LP2824 Printer cable Power supply 1 set of labels (1,680 pcs.) Adapters, Rails and Cables There are multiple optional adapters, rails and cables which can be used with all KermaX plus and KermaX® plus TinO Systems. More detailed information on request. DOSE AREA PRODUCT METERS

75 Partners and External Manufacturers PRODUCT OVERVIEW TABLES Radiography / Fluoroscopy Artinis: Contrast-Detail-Phantom CDRAD Contrast-Detail-Phantom CD DISC 2.0 Mammography Artinis: Test Device PASMAM 1054 C Test Device Mam-14 Test Device Mam-162 Contrast-Detail-Phantom CDMAM PMMA Spacer Set DIGIMAM Phantom EU Test Set Pehamed: Mammographic Step Wedge Test Device Breast Compression Computed Tomography IRIS: Software CT QALite The Phantom Lab: Catphan 500 Phantom Catphan 600 Phantom Catphan 700 Phantom Dental Radiography Artinis: Contrast-Detail Phantom CDDENT Film Processing Pehamed: Software Infosens Accessories for Radiology Hüttner: Line Pair Tests Radiation Safety Graetz: Electronic Personal Dosemeter ED 150 STEP: Survey Meter 3D Survey Meter OD-02 Dose Area Product Meters Seiko: Printer Set “Star” Zebra: Printer Set “Zebra S”

76 Discover more online: iba-dosimetry.com IBA offers innovative high-quality solutions and services with a focus on patient safety in cancer diagnosis and therapy. Medical Imaging: Safer Imaging, Earlier Cancer Detection Innovative Quality Assurance (QA) devices for x-ray dose and image quality checks, as well as QA of diagnostic displays Patient dose monitoring solutions for x-ray imaging systems Radiation Therapy: Fighting Cancer Safely and Precisely Europe, Middle East, Africa IBA Dosimetry GmbH Bahnhofstr. 5 90592 Schwarzenbruck, Germany Tel.: +49 9128 607 0 Fax: +49 9128 607 10 North America, Latin America Industry-leading dosimetry and QA solutions that maximize IBA Dosimetry America efficiency and minimize errors for better outcomes 3150 Stage Post Drive, Suite 110 Flexible soft tissue imaging markers (VISICOIL™) enable precise tumor targeting and tracking for pinpoint RT, IGRT and SBRT treatment accuracy and patient safety Undisputed leader in Proton Therapy delivery systems: Providing highly precise and effective radiation therapy Distributed by: Bartlett, TN 38133, USA Tel.: +1 901 386 2242 Fax: +1 901 382 9453 Asia Pacific IBA Dosimetry Asia Pacific No.6, Xing Guang Er Jie Beijing OPTO-mechatronics Industrial Park (OIP), Tongzhou District Beijing 101111, China Tel.: +86 10 8080 9288 Fax: +86 10 8080 9299 dosimetry-info@iba-group.com MI-BR-E-Prod-Overview_Rev.8_0219 | © IBA 2019 | All rights reserved Depicted product images may differ from the actual scope of delivery. Images and technical specifications are subject to change without prior notice. PRODUCT OVERVIEW RADIODIAGNOSTICS